日本电子维修技术 希捷11代12代硬盘固件门F3修复指令详解2

2 - Defect List Options.      

        This parameter is a bit significant value that selects the following options:      

            Bits 31-3: not used      

            Bit 2: Process the Active Error Log.      

                   This bit is only valid when the User Partition is selected.  If this bit is equal to 1, the Format Client Defect List will be written with contents of the Active Error Log and the option to process the Client                    Defect List will be enabled.  If there is no Active Error Log or there                    are no R/W-related entries in the Active Error Log, then this bit will                    be ignored.  

            Bit 1: Process Primary Defect Lists.      

                   This bit is only valid when the User Partition is selected.  If this bit is equal to 1, the Primary Defect Lists will be used when                    creating the defect list to be used by the format operation.

            Bit 0: Process Grown Defect Lists.      

                   This bit is only valid when the User Partition is selected.  If this bit is equal to 1, the the Grown Defect Lists will be used when                    creating the defect list to be used by the format operation.      

          Type:    Unsigned 32-bit value      

          Range:   0 or 0xFFFFFFFF      

          Default: 0x00000003 (Process Grown Defect Lists,

                               Process Primary Defect Lists,

                               Do not process the Active Error Log)      

    3 - Maximum Write Retry Count.      

        If this parameter is entered, the maximum write retry count will be set to the specified value.  This parameter is only valid when the User Partition is being formatted (Parameter 0 is equal to 0).  If this parameter is not entered, the maximum write retry count will not be changed.      

          Type:    Unsigned 16-bit value      

          Range:   0 or 0xFFFF      

          Default: None.      

    4 - Maximum Read Retry Count.      

        If this paremeter is entered, the maximum read retry count will be set to the specified value.  This parameter is only valid when the User Partition is being formatted (Parameter 0 is equal to 0).  If this parameter is not entered, the maximum read retry count will not be changed.

     

          Type:    Unsigned 16-bit value      

          Range:   0 or 0xFFFF      

          Default: None.      

    5 - Maximum ECC T-Level.      

        If this paremeter is entered, the maximum ECC T-Level will be set to the specified value.  This parameter is only valid when the User Partition is being formatted (Parameter 0 is equal to 0).  If this parameter is not entered, the ECC T-Level will not be changed.      

          Type:    Unsigned 16-bit value      

          Range:   0 or 0xFFFF      

          Default: None.      

    6 - Track Rewrite During Certify Retry Threshold.      

        If this parameter is entered, it specifies the maximum number of rewrite retries to be performed during the user partition certification pass.      

          Type:    Unsigned 16-bit value      

          Range:   0 or 0xFFFF      

          Default: None.  If this parameter is not entered, the default value recommended by the R/W Firmware will be used.      

    7 - Valid Command Key.      

        For a User Partition format, this parameter must be equal to 22 Hex.  If this parameter is not equal to 22 Hex, the command will not be executed.      

        For a System Partition format, this parameter must be equal to DD Hex.  If this parameter is not equal to DD Hex, the command will not be executed.      

          Type:    Unsigned 8-bit value      

          Range:   0x22 or 0xDD      

          Default: None      

    8 - Data Pattern For Format.      

        This parameter specifies the data pattern to be used when formatting the specified partition.  If this parameter is not entered, the specified partition will be formatted with a 0x00000000 data pattern.      

          Type:    Unsigned 32-bit value      

          Range:   0 or 0xFFFFFFFF      

          Default: 0x00000000.

Examples:  

    Example #1:

    Perform a "quick format" (process defect lists, clear format corrupt, do not write or certify the drive)  

       F3 T>m0,6,,,,,,22  

    Example #2:

    Perform a "quick format" (don't process defect lists i.e. unslip and unalt, do not write or certify the drive)



       F3 T>m0,6,0,,,,,22  

    Example #3:

    Perform a format with the default data pattern 0x00000000 and certify with event reporting enabled:  

       F3 T>m0,8,,,,,,22  

    Example #4:

    Perform a format and certify with event reporting enabled, set max write retries to 16, set max read retry count to 8, max ECC T-Level to 0, and track rewrite during certify retry threshold to 20:  

       F3 T>m0,8,,10,8,0,14,22  

    Example #5:

    Perform a format with user input data pattern 0xFFFFFFFF and certify with event reporting enabled:  

       F3 T>m0,8,,,,,,22,ffffffff

输入修复指令时，对应每一条指令的参数慎重选择，否则会导致不可恢复的灾难故障。





评论
肿么看不明白

评论
现在修硬盘赚钱多吗？硬盘太便宜了。

评论
能否解释一下这个~Request Resume Save smart frame

评论
看不明白，还是中文的好

评论
同求中文的啊 谢谢了 电路 电子 维修 我现在把定影部分拆出来了。想换下滚，因为卡纸。但是我发现灯管挡住了。拆不了。不会拆。论坛里的高手拆解过吗？ 评论 认真看，认真瞧。果然有收 电路 电子 维修 求创维42c08RD电路图 评论 电视的图纸很少见 评论 电视的图纸很少见 评论 创维的图纸你要说 版号，不然无能为力 评论 板号5800-p42ALM-0050 168P-P42CLM-01
 ·日本中文新闻 日本26年新成人预估仅109万 与去年并列历史第二低
·日本中文新闻 日本皇居新年参贺突发裸奔事件 男子涉公然猥亵被捕
·日本中文新闻 印度宣布超越日本成为全球第四大经济体
·日本留学生活 在熟悉的城市，遇見不一樣的感受
·日本留学生活 求购一些水电燃气话费等公共料金请求书
·日本华人网络交流 制造信息垃圾的产业，这种现象在日本尤其普遍。
·日本华人网络交流 美军入侵 委内瑞拉领空 并非零伤亡
·日本华人网络交流 年末采购食品，恰时间就能全半价。
 ·中文新闻 马丁·克鲁内斯 (Martin Clunes) 在新剧中变身休·爱德华兹 (Huw Edw
·中文新闻 当朋友们讲述他们对他们的阴谋感到震惊以及他们如何向他们隐